你好。
Hello.

在本教程中，我们将学习pellets和kill off指令的用法。
In this tutorial, we will learn pellets and kill off instructions usage.

我将再次插入该行。
I will insert the line again.

还有一行。
And one more line.

10 我们已经了解了，例如，老年人，例如，55 和向上箭头，当 N55 处于条件状态时，您会看到，只有一个循环时间，55 允许将功率流传递到右侧，并且一个暂停。
And 10 we already learned, for example, elderly people, for example, 55 and the up arrow you will see when N55 is on condition in on condition, just one cycle time and 55 is allowing to pass power flow to the right side and one pause.

该指令变得活跃。
The instructions became an active.

但现在我们将学习指令以及上升年龄和下降年龄，例如阿尔迪和8000阿尔迪，例如150，并且在这里我将插入单词垂直线。
But now we will learn instruction and of the rising age and the falling age, for example, Aldi and 8000 Aldi and, for example, 150 and also into here I will insert the word vertical line.

好的，L.D.
OK, L.D.

例如，151 和地点，以及 155。
151 and place, for example, and 155.

好的。
OK.

只需一关。
Just one pass.

这将是活跃的并且 155 进入这里，我会说 PLF am 150。
This will be active and 155 into here and I will say PLF am 150.

六个，可以吗？
Six, OK?

让我们在这里定义一个计数器 L.D.
And let's define here one counter L.D.

和155。
and 155.

这里又一行。
And here another one line.

或者上午 156 点，好的，就在这里。
Or AM 156, OK, and here.

我们可以左键单击并输出和计数器一。
We can at left click and the output and counter one.

例如，五个，好的，然后我们就可以转换我们的程序了。
And for example, five, OK, then we can convert our program.

现在让我们将其发送给保单。
Now let's send it to the policy.

主程序执行。
The main program execute.

是的，这就是一个人。
And yes, this is what one am.

一百五十或五十一处于活动状态。
One hundred fifty or fifty one is active.

只有一个脉冲，对吗？
Just one pulse, right?

150 是活动的，只要一个脉冲，155 就会感觉到活动或在 PLF 指令之前进入这里，151 会活动，但 156 不会活动。
And 150 is active, just one pulse and 155 feel the active or into here before PLF instruction and 151 will be active, but and 156 is not going to be active.

151 人中有 1 人处于 2 人关闭状态。
One in 151 became on two off condition.

这是因为 PLF，这些只会在一个周期内处于活动状态。
This is because PLF, these will be active just one cycle.

好的。
OK.

这个很重要。
This is important.

那我们再等一会儿就可以看到结果了好吗？
Then let's wait a little bit more and we will see the results OK?

这样继续下去，我会说是的。
This continued, I will say yes.

完成并关闭，然后我们可以进入监控模式，监控状态现在处于错误状态。
And it's completed and close, and then we can go to monitor mode and monitor status is now in the wrong condition.

让我们开始吧。
And let's start it.

首先，我愿意。
Firstly, I want to.

像这样把这个面积加起来，好吗？
Add up this area a little bit like that, OK?

在这方面，我会这样说，好吗？
And in this area, I will put it like that, OK?

你会看到它，150，我会成功的。
And you will see it and 150, I will make it on.

好的。
OK.

这是一个脉冲，155。
This is a pulse and 155.

仅仅一个脉冲就变成了一个八度。
Just one pulse became an octave.

你看不到他们 155。
You can't see em 155.

联系方式尚不清楚，但 150 已开启。
Contact is enough of not a known, but a 150 is on.

但我们用故事来思考，另一种没有用地方脉搏的指导。
But we thought with the story, another without with the place pulse instruction.

只有一个脉冲。
Just one pulse.

它变成了一个活跃的无。
It became an active none.

在这里你会看到我的计数器值为一。
In here you will see my counter value is one.

让我们让它快速切换。
Let's make it toggle fast.

这仍然是一个，但如果我激活和151。
This is still one, but if I activate and 151.

这就是总力量。
Than this is total force.

现在这是活动的，但计数器数据仍然是 1，因为我们现在不使用位置，而是使用 PLF。
Now this is active, but counter data is still one because we are not using place now we are using PLF.

这是一个坠落完成的事情。
This is a falling is done.

如果我们要运行PLF指令，那么在条件满足之前，PLF指令必须自动关闭。
If we want to run PLF instruction, then before the condition, PLF instruction must be auto off.

现在这个是打开的，现在这个是关闭的。
Now this is on and now this is off.

因此 PLF 运行且 156 处于活动状态。
So PLF run and 156 is active.

它只需要通过这些所有指令的周期时间。
It just want cycle time via these all instruction.

转到此处，计数器数据增加 1，再次进行测试，AM 150 处于活动状态。
It goes to here and the counter data incrementing by one that's tested once more and AM 150 is active.

突然你会看到计数器数据是 3 个已购买且 151 个处于活动状态。
And suddenly you will see the counter data is three bought and 151 is active.

因此，它不仅仅增加了其中两个的厌恶感，而是再次增加了四个厌恶感，我们有了一个输出。
So it is not incrementing just one disgust on two of it is four again once more and we have an output.

我们是柜台一。
We are counter one.

好的。
OK.

这个很重要。
This is important.

这是怎么才能使用PLF指令的地方呢？
This is how can we use place and PLF instruction into?

极客开发者，我已经完成了本教程。
Geeks developer, I'm finished for this tutorial.

我们下个教程见。
See you in the next tutorial.